Welcome to W. Amsler Equipment Inc.

Locate Us

31 Parr Blvd, Bolton, ON

Call Us

+1 905-951-9559

Write To Us

info@amslerequipment.net

Bottle Filler Machine in Canada, USA

Blow Molded Bottle Leak Detection Overview For Executives

Heidi Amsler

WHERE DO LEAKS COME FROM?

The blow molding of bottles involves the stretching of plastic under air pressure to force the bottle wall material against the internal walls of a mold to give a bottle its final shape.  In the case of extrusion blow molding, the plastic is melted in the extruder barrel by mechanical working and electrical heating to achieve a viscosity that can be shaped into a cylinder (parison) that is then welded into a body with only one opening through which the compressed air is introduced to perform the final shaping.  Why do holes appear in the final product?  First, the amount of stretching can exceed the ability of the plastic to stay together and the bottle wall can thin down to nothing, causing a tear.  Second, impurities (dirt) can be introduced into the plastic through the recycling of scrap that is blended with virgin resin and it’s also possible that dirt particles can find their way into the resin storage boxes (gaylords) or silos.  In this case, the molten plastic does not adhere to the dirt particle and it causes a weak point in the bottle wall.  Third, blow-molded bottles can contain several welded areas, such as at the base of the bottle, on the sides below the neck to make a taper, and around the inside of handles formed by welding and cutting out the center of the handle so the user’s hand can pass through (milk gallons).

WHY ARE LEAKY BOTTLES A PROBLEM?

One might think that losing a few bottles because of leaks would not be a major cost to a blow molder.  That is right, when the leaker is discovered, rejected, and recycled into a new bottle by re-melting the plastic.  However, after a bottle has been labeled, filled with a liquid and capped, then packed into a box that is stored and transported stacked up eight feet high, one leaker can cause a much larger loss in a damaged product that has to be scrapped.  Another example is in the home and office water delivery business.  When a bottle is upside-down on a dispenser, it is the vacuum in the bottle that keeps the water from running out onto the floor and requiring the repair or replacement of the floor.  A small leak in the base of the 5-gallon bottle will allow this damage to occur, which the water supplier normally has to pay to repair.

WHAT MAKES BOTTLE LEAK DETECTION DIFFICULT?

A common type of leak detector operates on the pressure-drop principle, meaning that a known pressure of air is created in the bottle and the system is sealed off.  If the drop in the pressure occurring over a set time exceeds a certain limit, it indicates that the bottle has a leak.   Leak testing takes place immediately after blow molding or, in the case of purchased bottles, immediately before filling.  In either case, the line speeds can be in the thousands of bottles per hour.  This limits the time to test each bottle to a few seconds.  Because leaks are small and the pressure that is used to test the bottles is low so that the bottles are not distorted, the detection of a pressure drop inside the bottle requires very sensitive instruments called transducers.  The evolution of automation equipment and digital computers over the years has made leak detectors more accurate and also made them a source of quality control data that documents the performance of the blow molding operation.

WHAT TYPES OF LEAK DETECTORS ARE AVAILABLE?

Several different designs have been in the market.  In one type, air at a known pressure is introduced into a tank of fixed volume and then this air is released into the bottle and the final pressure in the bottle is measured to see if it achieves the expected value.  This method relies on all bottles being of the same size.

The most common type of leak detector is the pressure drop test as described above.  The simplest have a single test head and a conveyor that indexes to bring each bottle under it.  With the bottle stationary, an air cylinder moves the test head down onto the neck of the bottle.  A soft rubber seal prevents leakage from the contact area between the test head and the neck of the bottle.  A valve opens and allows air to fill the container to set pressure and then closes.  The pressure in the bottle attains a level and settles down to a steady reading and then the test period begins.  If the pressure stays above a set level, the bottle is good.  Otherwise, the bottle is rejected from the conveyor.

In addition to detecting leaks, pressure-decay bottle inspection units can often be set up to test for the following:

  • Wall thickness variation
  • Choked / obstructed necks
  • Defective neck finish
  • Color
  • Fallen bottles

Click Link for Leak Testing Videos: https://amslerequipment.com/en/leak-testers/

Screenshot of Leak Tester User Interface

Another test method is the use of a vacuum pump to create a negative pressure inside the bottle when compared to the atmospheric pressure in the room outside the bottle.  This test can work better in some cases involving cracks, rather than holes in the wall of the bottle.  In this case, if the low pressure inside the bottle rises by a given amount during a set time, due to the entrance of air from the outside into the bottle, the test shows the presence of a leak.

Leak testers can have a single head or multiple heads.  These can be stationary or “flying”, meaning that the heads follow the bottles on the conveyor as they pass by without stopping the conveyor.  The flying-head leak tester can test faster than a stationary-head tester and multiple-head testers are able to test faster than a single-head leak detector.  Beyond the design of the leak detector, the speed that a leak detector can achieve is dependent on the bottle size (the smaller, the faster) and the size of the smallest hole that the operator wants to detect.  The smaller the hole (.006 inches is a reasonable lower limit), the longer it takes for the test to occur and the fewer bottles can be tested per hour.

Pictured Above Manual Table Top Leak Tester

Amsler Leak Tester Detects Neck Ovality Issues

Heidi Amsler

Press Release Summary:

Amsler Leak Tester used for inspecting bottle sizes from 10ml to 20 liters at a rate up to 18,000 bottles/hr and hole sizes as small as 0.006 in. Tester is equipped with locking castor wheels, dual guide rails, and powder-coated frame. Tester comes with graphical display, automated self-test feature and optional color deviation, batch counting and fallen bottle detection. Unit is operated on either continuous motion or indexing conveyor.

Picture2

Original Press Release:

W. Amsler to Introduce New Leak Tester with Enhanced Functionality at NPE2018

RICHMOND HILL, Ontario, March 27, 2018 – W. Amsler Equipment Inc., a leading supplier of all-electric linear PET stretch blow molders, will demonstrates a new leak tester with added functionality and performance at the upcoming NPE2018 May 7-11 at the Orlando  Orange County Convention Center in Orlando, Fla. (Booth #S21067). Amsler will also highlight its standalone spin trimmer for stretch and extrusion blow molding.

The enhanced leak tester is equipped with a new camera system that can detect neck ovality issues, says Heidi Amsler, marketing manager for W. Amsler. The bottle inspection unit operates on either a continuous motion or indexing conveyor. The leak tester comes with one or two cameras and a lighting system which is installed over the top of the conveyor.

The Amsler leak tester inspects bottle sizes from 10ml to 20 liters at a rate up to 18,000 bottles/hr. The unit provides high-speed detection of holes as small as 0.006-in and can check for obstructions in the bottle neck and variations in wall thickness. Other key optional features include color deviation, batch counting, fallen bottle detection, can inspection and larger size container inspection systems.

The leak tester’s B&R color touchscreen operator interface features a graphical display of test results, easy-to-use icon-based menu system, recipe storage, password protection, and automated self-test feature.

The unit’s is equipped with locking castor wheels, dual guide rails, and powder-coated frame. The standard conveyor is 6.5 feet long and extended lengths and widths are available.

Custom solutions can be designed to suit specific application and plant layout needs.

W. Amsler will also showcase its spin trimmers for trimming PETG, PET, HDPE, PVC, PE, and PP containers in either two-step stretch blow molding or extrusion blow molded plants. The compact, standalone unit is built with powder-coated steel for extended life and castor wheels enable easy transport throughout the plant. The spin trimmer handles container diameters up to 200mm at a rate of up to 6000 jars/hr.

Original Article – https://news.thomasnet.com/fullstory/w-amsler-to-introduce-new-leak-tester-with-enhanced-functionality-at-npe2018-40010521

 

W. Amsler to Introduce New Leak Tester With Enhanced Functionality at NPE2018

Heidi Amsler

Picture1

RICHMOND HILL, Ontario, March 27, 2018 – W. Amsler Equipment Inc., a leading supplier of all-electric linear PET stretch blow molders, will demonstrates a new leak tester with added functionality and performance at the upcoming NPE2018 May 7-11 at the Orlando Orange County Convention Center in Orlando, Fla. (Booth #S21067). Amsler will also highlight its standalone spin trimmer for stretch and extrusion blow molding.

Picture2

The enhanced leak tester is equipped with a new camera system that can detect neck ovality issues, says Heidi Amsler, marketing manager for W. Amsler. The bottle inspection unit operates on either a continuous motion or indexing conveyor. The leak tester comes with one or two cameras and a lighting system which is installed over the top of the conveyor.

The Amsler leak tester inspects bottle sizes from 10ml to 20 liters at a rate up to 18,000 bottles/hr. The unit provides high-speed detection of holes as small as 0.006-in and can check for obstructions in the bottle neck and variations in wall thickness. Other key optional features include color deviation, batch counting, fallen bottle detection, can inspection and larger size container inspection systems.

The leak tester’s B&R color touchscreen operator interface features a graphical display of test results, easy-to-use icon-based menu system, recipe storage, password protection, and automated self-test feature.

The unit’s is equipped with locking castor wheels, dual guide rails, and powder-coated frame. The standard conveyor is 6.5 feet long and extended lengths and widths are available. Custom solutions can be designed to suit specific application and plant layout needs.

Picture3

W. Amsler will also showcase its spin trimmers for trimming PETG, PET, HDPE, PVC, PE, and PP containers in either two-step stretch blow molding or extrusion blow molded plants. The compact, standalone unit is built with powder-coated steel for extended life and castor wheels enable easy transport throughout the plant. The spin trimmer handles container diameters up to 200mm at a rate of up to 6000 jars/hr.

About W. Amsler Equipment Inc.

W. Amsler Equipment Inc. is the only North American manufacturer of all-electric linear PET stretch blow molders, 100% designed, built and serviced in North America. W. Amsler is a privately-held Canadian company founded in 1994 by Werner Amsler. In addition to PET stretch blow molding machines, Amsler supplies equipment for complete blow molding plants and filling lines. These products include bottle inspection units, blow-dome spin-off trimmers, air compressors, vacuum conveyors, blow molds, gaylord dumpers, mold temperature control units, and process chillers. For more information, visit www.amslerequipment.net.

PRESS CONTACT:
Joseph Grande
J. Grande communications Inc.
413.684.2463
joe@jgrandecommunications.com

5 Gallon Leak Testers – Up to 3000 bottles per hour.

Heidi Amsler

5gallonTest bottles for leaks at rates of up to 3,000 bottles per hour. Detect hole sizes as small as .010. Custom conveyor systems are available.

All units feature recipe storage, onscreen test results, self test feature, and quick adjust test head heights. Various test head sizes are available to accommodate a variety of container sizes.

Temperature testing is available to help detect bottles with ice. Chocked neck and wall thickness inspection is an option when the unit is inline with a blow molding machine

Table Top Leak Tester – Up to 800 bottles per hour. Setup in a lab for off-linetesting. Speeds are operator dependent.

table-top-leak-testercropped

 

Standard Leak tester up to 1,000 bottles per hour Includes 6.5 foot indexing conveyor. Setup inline with blow molder or filling equipment or use as a stand alone unit.

Flying Head leak tester – Up to 3,000 bottles per hour Includes 6.5 foot continuous conveyor. The leak testing head follows the bottle during the test.

 

Amsler Announces Expanded Leak Testing Capabilities at NPE 2012 (See Video Below)

Heidi Amsler

New Advancements Include High-Output Single-Head and Flying Head with Timing Screw
ORLANDO, Fla., April 1, 2012 – W. Amsler Equipment Inc., a leading manufacturer of all-electric, reheat stretch-blow molding machines and ancillary equipment based in Richmond Hill, Ont., Canada, has announced several new features and capabilities for its broad line of leak testers. Among the new products are a flying head leak tester with timing screw for difficult-to-process bottles and a high-output single-head unit. Amsler made the introductions at NPE 2012: The International Plastics Showcase, April 1-5, 2012 at the Orange County Convention Center in Orlando, Fla. (Booth #583).

Amsler’s innovative flying head design, which provides high output, flexibility, and tool-free changeovers., now comes with a timing screw for easier bottle handling and more precise positioning on the conveyor. The unit uses a timing screw and pneumatic gating to orient and process more difficult bottles, particularly those that shingle. The five-head unit, which runs up to 250 bottles/min is for plastic containers up to 2 liters for beverage, personal-care, consumer goods, and other markets.

The flying head design is one of the fastest, most cost-effective, user-friendly, and compact solutions in the industry, ensuring maximum productivity and improved quality for processors and product manufacturers, according to President Werner Amsler.

Amsler also introduced a simple, single-head flying head leak tester with no gates or change parts. It is easy to operate and delivers 50% greater output than traditional single-head leak testers, according to the company. The single-head leak tester can be built onto an existing conveyor line without requiring modification to the existing line.

Amsler’s new leak testing features and capabilities are fully tested and commercially available.


About W. Amsler Equipment Inc.

W. Amsler Equipment Inc. is a privately-held Canadian company founded in 1994 by Werner Amsler. In addition to rotary and linear blow molding machines, W. Amsler also supplies auxiliary equipment for complete blow bolding plants, water treatment, and filling lines. Other products include bottle-inspection units, air compressors, process chillers, mold temperature-control units, blow-dome spin-off trimmers, gaylord dumpers, vacuum conveyors, and blow molds. The company has also partnered with companies to provide turnkey liquid filling equipment. More details are available at www.amslerequipment.net.

Multi Head Leak Tester

Heidi Amsler

Video of the multi-head bottle inspection system, built in Canada.

Features include:
– Leak Detection as small as 0.006″ hole or crack
– Wall distribution
– Choked necks
– Color Inspection
– Batch Counting
– Print Shift Summary

Test 1 Liter bottles at 10,000 bottles per hour.

More information & video for this system is available on our website http://www.amslerequipment.net/

5 Gallon leak tester – Up to 3000 Bottles per hour.

Heidi Amsler

Test large format reusable and new bottles for leaks.
Suitable for 10 liter to 23 Liter size containers.

– Output up to 3000 bottles per hour on a 3 head system.
– The 2 head system will test 2000 bottles per hour.
– Test for leaks as small as 0.008
– Temperature testing – reduces false rejects due to warm wash and colder climate conditions.
– System is wash down ready